Wet Trades are the trades which use materials mixed with water. These trades often require apprenticeships and on-the-job training. For those looking to get into this trade, there are several training courses that provide hands-on experience and help you to become more familiar with the process.

Problems with excess cement

The first thing to remember is that the concrete that you work with must contain the right amount of water. Too much water can make the concrete too soft or brittle. The right amount of water is just enough to activate all the cement in the mix. Too much water can also cause the cement to crack or flake. To avoid these problems, make sure that the concrete is just moist enough to be worked by trowel.

Another important factor to keep in mind is that cement is porous and will absorb water like a sponge. When the concrete becomes too wet, it will develop cracks, and will eventually break down. It’s important to use a good quality sealer to prevent water from penetrating the concrete.

Alternatives

Alternatives to concrete render are a great option for many projects. These materials have a range of advantages and are far less expensive than concrete. They are durable, flexible, and are available in many colours. They are often used to create a smooth finish. They are also a good choice if you want a textured or patterned finish. Renders are also an effective way to improve the insulation of your home. Lime renders are particularly suitable for historic buildings, and silicone based renders are low maintenance and flexible. These finishes are a great improvement over concrete renders and can be purchased for less than PS60 a square metre.

Both cement and acrylic renders have their advantages and disadvantages. While concrete render is easier to apply, it requires proper preparation of the walls. The mixture must be mixed properly to ensure a smooth and even finish.

Cost of CMI(r) Masonry Mortar 086

CEMEX Masonry Cement has been specially formulated to meet the requirements of masonry construction. It is available in Type N, Type S and Type M strength levels. These masonry cements can be mixed with sand and water. In addition, they do not require the addition of hydrated lime.

CMI(r) Masonry Mortar is available in packages of 80 pounds (36.2 kg) for hand mixing or reusable bulk bags for silo systems. Bulk mortar is shipped to the job site by truck and loaded into portable silos by forklift. It is then dispensed into a mechanical batch mixer.

Wet Trades – Waterproofing Tape

Waterproofing tape is an economical, easy-to-apply solution that provides a reliable water barrier. It is also an excellent alternative to liquid-applied products. However, the tape can fail if installation practices are not proper. Therefore, it is important to carefully consider its usage and installation requirements.

Aquatac

Waterproofing tapes are produced using bitumen or butyl-based resins. They have special properties and adhere tightly to the surfaces they are applied to, preventing water leakage and loss of performance. These tapes can be used for a number of applications, from roofing systems to pipe transitions. They can also be used to repair cracks in pools.

Duct tape

Duct tape is a waterproofing material that can be used on a variety of surfaces, from floors and walls to ceilings and roofs. It has a polyethylene coating that makes it exceptionally water-resistant. Duct tape works best on smooth, non-porous surfaces. If you’re installing it on porous surfaces, you may want to use a primer to make sure it sticks properly.

Acrylic tape

Acrylic waterproofing tape is widely used in the construction industry to provide a water-resistant seal. Its high level of cohesion makes it a durable solution for seam sealing, house wraps, and vapor barriers. Unlike other rubber chemistries, acrylic waterproofing tape can withstand harsh environments and be used for many years.

Butyl rubber tape

The first step in applying butyl tape is to make sure the surface is dry and clean. After this, peel off the backing. You can also apply the butyl tape in multiple layers to strengthen and reinforce the project. To achieve the best results, the butyl tape must be kept clean, dry and dust-free at all times.

Evo-Stik Technik tanking tape

Evo-Stik Technik tanking tape is a self-adhesive water-tight sealant for bathrooms and wet rooms. The water-resistant adhesive is a solvent-free liquid film that is easy to apply and remove. This waterproofing system is highly durable and has been tested and proven in commercial and industrial installations.

Gorilla Waterproof Patch & Seal Tape

Wet Trades Gorilla Waterproof Patch and Seal Tape is an extra-strong adhesive tape that stops leaks instantly. The thick adhesive layer helps to completely seal out water and air. It conforms to most surfaces and is UV-resistant.

Non-slip waterproof tape

Non-slip waterproofing tape is ideal for walkways, ramps, and steps, and provides a durable and comfortable grip on slick surfaces. It’s a versatile material that is available in different colors, patterns, and widths.

Types of Acrylic Render From Wet Trades

Acrylic render is the standard type of finish for many home projects. It comes in different types, including Silicone-enhanced, Monocouche, and Polymer-modified varieties. Using the right type of render will greatly improve the overall look of your project. It also offers superior durability and is a great option for exterior or interior projects.

Acrylic render

Acrylic render is a paint that can be applied to the exterior or interior walls of a home. It is suitable for a range of surfaces, including rough surfaces. You can apply it over bare bricks, painted walls, and concrete blocks. It dries fast, and is ideal for use on buildings. However, it is important to note that acrylic render is not breathable, so you must use a waterproofing membrane before applying it.

Silicone-enhanced render

Silicone-enhanced acrylic render is a high-performance thin coat render made from acrylic resins and silicone additives. It is part of the Johnstone’s Trade Stormshield System and is available in a 1.5mm and 2.5mm thickness.

Monocouche render

Monocouche render is a high-quality, one-coat cement-based render that can be applied to a variety of surfaces. It is a highly durable, weather-resistant and breathable choice for exterior and interior rendering. Compared to traditional sand-and-cement render, monocouche renders provide a more pleasing finish. These products also feature high-quality pigmentation. These finishes are not only durable but also require low maintenance. They can also be painted.

Polymer-modified render

Polymer-modified acrylic render is similar to traditional cement render, but contains polymers to make it more durable and flexible. This type of render also dries quickly, allowing for a quick and efficient process of patching and levelling. It is available in a variety of shades and can be mixed with colour additives. Because of the added polymers, polymer-modified acrylic render is more expensive than standard cement render.

Silicone-modified render

Silicone-modified acrylic render is a high-quality, long-lasting alternative to sand and cement render. The silicone-modified acrylic formula is resistant to UV rays, helps to prevent discolouration, and improves thermal performance. It is also more affordable than sand and cement render, which requires frequent painting and repair. However, silicone-modified acrylic render has some disadvantages.

Wet Trades – Concrete Sealer

There are a few different types of concrete sealer available. There are water-based products, acrylic products, high-gloss products, and a brand called Tru Grip. Each has its own pros and cons, so it’s important to choose the right one for your project.

Water based

Water-based concrete sealers are a great way to protect your concrete. These products contain polymers suspended in a water solution that change shape and form a transparent coating. This protects the concrete and gives it a shine. These products are available in different gloss levels.

To choose the right concrete sealer for your project, you should understand the type of concrete surface you have and where you plan to apply it. Some concrete sealers are penetrating, while others are designed to provide a more durable coating. For example, a water-based acrylic sealer will not be suitable for a driveway that is exposed to road salt.

Acrylic

There are several different types of concrete sealers. There are those that are solvent-based, and there are those that are water-based. These types of sealers can be purchased at a home improvement center or in a paint store. There are even those that are transparent, which can give your building a unique look.

One of the best things about a concrete sealer is that it can help prevent water from absorbing into the concrete. However, when applied incorrectly, it can cause the sealer to blush or debond from the surface. Fortunately, these problems are more preventable than they are to solve, and are easily avoided.

High gloss

Wet Trades high gloss concrete sealer is a two coat, water-based sealer that is easy to apply and lasts for years. It’s suitable for use in states that have low VOC requirements and covers 200 square feet per gallon. This product is water-based and should be applied wet-on-wet. It’s important to apply the second coat after the first has dried.

Choosing the desired gloss level will ultimately depend on your needs and preferences. Higher gloss levels are a better choice if you’d like to have more vibrant colors, or want a shiny finish. Also, high-gloss sealers have higher solids content, which creates a thicker film and glossy surface. The result is a high-end look.

Tru Grip

Adding Tru Grip to concrete sealer is a great way to reduce the chance of slipping on a wet surface. The micronized polymeric particles used in Tru Grip provide maximum slip resistance while having minimal effect on the surface. Tru Grip is safe to use over many types of concrete and is tested to comply with AS 4586:2013.